L22515 14AWG LCDI Power Cord Plug for A/C Air Conditioner, E250451 UL Certified, 7.5FT Leakage Current Detection Interrupter Replacement, 120V 15A 1800W 60Hz NEMA 5-15P, 1 Pack

What is LCDI Plug? The LCDI (Leakage Current Detection Interrupter) utilizes built-in shielded power conductors to sense breakage of hot line and white line in the power cord, avoiding the fire caused by arcing due to the aged power cord and leakage current. This product has been evaluated and determined to be suitable for air conditioner loads only in accordance with UL1699. Engineering and manufacturing of electrical safety for over 30 years, we are leading innovation and technology upgrade in Ground Fault Circuit Interrupters (GFCI's), Leakage Current Detection and Interruption Devices (LCDI’s), Cord Protection with Portable Residual Current Devices (PRCD), Arc Fault Circuit Interrupters (AFCI’s), Appliance Leakage-Current Interrupters (ALCI's), USB Receptacle, Wire & Cable, Wiring Devices, Wall Plates, Dimmer, Sensor, Night Light, Delayed Switch and so on… We believes in providing friendly solutions by adopting a consumer-centric and efficient problem-solving approach. Going above and beyond in the future continuously in electrical safety use and smart home appliance, we will constantly make explorations and innovations to meet the ever-changing demand of our consumers.

• 【Protection Technology】 The LCDI (Leakage Current Detection Interrupter) utilizes built-in shielded power conductors. Its input side is provided with NEMA WD6 plug, and load side is provided with a cord consisting of ungrounded conductor (L), grounded conductor (N) and grounding conductor which are surrounded by shields. It is intended to provide protection against the hazards or fire caused by the aging of the power cord or leakage current.
• 【Security Assurance】 If a leakage current less than 5mA between the shield wire and the Neutral or Hot wire is detected, the LCDI immediately trips to interrupt the flow of electricity within 0.5s.
• 【Suitable for A/C】 The LCDI power cord is suitable for air conditioner loads, such as portable air conditioners, window air conditioners and PTAC (Packaged Terminal Air Conditioner) for indoor use.
• 【Easy Installation】 Comes with a 14AWG x 3C power cord of about 2.2 meters long with terminals for Hot wire (black), Neutral wire (white) and Ground wire (green) for easy wiring. Rated 120 Volt 15 Amp, 1800 Watt.
• 【UL Certificated】 Designed and tested in accordance with UL. Meet UL1699 requirements.